Vtube studio как сделать персонажа

Уроки от Хаки

Как создать 3D модель во Vroid’е и экспортировать её в MMD/Blender

Эх, помню, как участвовала в бета-тесте, когда клепать модельки во Vroid’e ещё не было мейнстримом. Да и первые записи в группе посвящены как раз этому софту. Так что почему бы хотя бы в форме статьи не отдать дань этой японской приложухе?

Кстати, статья получается очень обширной, так что используйте оглавление.

Скачать Vroid

Как видим, продукт находится ещё в стадии беты. На момент написания статьи последняя версия — 0.8.2.

Подождите, пока архив скачается, а затем разархивируйте его в удобную папку, у меня это Programs/Vroid Studio.

Vroid Hub

Это склад прекрасных (а иногда и ужасных) моделей, созданных другими пользователями.

Чтобы прикоснуться к прекрасному или поделиться своими шедеврами с другими — нужна учётная запись сайта Pixiv (при поддержки которого Vroid и появился).
Регистрация крайне проста, но если вас смущают японские слова — используйте переводчики сайтов.

Создание персонажа

Путь к созданным аватарам:
*Путь к вашим документам*\Documents\vroid\avatars\ИмяАватара.vroid
Путь к стандартным аватарам:
*Путь к вашей папке Vroid Studio*\VRoidStudio_Data\StreamingAssets\VRoidStudio\Samples\ИмяАватара.vroid

Чтобы создать нового персонажа, нужно нажать на недвусмысленный плюсик с надписью «New Avatar» (Новый Аватар)

Нас предусмотрительно попросят выбрать пол аватара, который почему-то назван здесь как тип. Возможно, в будущем добавят больше гендеров, но пока имеем, что имеем.

Вжух — и Жизель загрузилась.

Кстати, я не знаю, как после этого вернуться на начальный экран. Надеюсь, в будущем добавят соответствующую кнопочку!

Обратим внимание сразу на Помощь (Help), это всегда пригодится.

Здесь и мануалы, и FAQ, и обратная связь… в общем, много ссылок. Я одобряю.

Хотя, помощь вы можете открыть и в самой папке. Впрочем, вас всё равно переадресуют на официальный сайт. Но мало ли кому пригодится.

И вот, вооружившись помощью, мы можем начать создавать из Жизель что-то своё, родное.

В арсенале у нас шесть вкладок:

Редактор лица

Слева — категории, справа — ползунки с параметрами, посередине — модель. Всё достаточно просто.

Не буду переводить все параметры, ибо, во-первых, их много, а во-вторых, перевести так, чтобы получилась не абра-кадабра будет очень сложно.

Все категории, Глаза, Форма глаз, Брови, Нос, Рот, Контуры лица.

Редактор тела

Очень похож на Редактор лица, только для тела. Логично.

Все категории, Тело (рост), Голова, Плечи, Руки, Ладони, Грудь, Талия (скорее бёдра), Ноги, Стопы.

Обратите внимание, что все параметры можно вписать вручную, при том, можно поставить экстремально большие или маленькие значения (включая отрицательные ).

Редактор одежды

На данный момент есть несколько пресетов одежды. Справа находятся параметры.

Есть три категории: Одежда, Аксессуары и Обувь.

Но главное, что стоит запомнить — Vroid Studio заточен под рисование текстур. То есть все базовые вещи, которые там есть, так и кричат: «Добавь мне текстуру!»
Прямо во Vroid’е возможно создать полностью готового персонажа, но тем не менее, функционал этой программы ограничен.

Если вы хотите моделировать одежду, а не рисовать её, оставьте просто «Base Model».

Редактор всего остального

На этой вкладке добавляются последние штрихи: Обводка, Rim (она же «сфера», подсветка вокруг), Затенение и даже Направление Глаз, если так можно выразиться.

Вкладка и параметры «Обводки»

Вкладка и параметры «Rim»

Вкладка и параметры «Затенения»

Вкладка и параметры «Глаз»

Как видите, можно регулировать обводку, Rim и затенение отдельно для волос, отдельно для лица (кроме Rim) и отдельно для тела.

Камера/экспорт (не редактор)

По традиции — категории:

Эмоции (также известные как «Морфы»), Фон (цвет, картинка), Позы и Анимации, Свет, Ветер, ПостЭффекты, Размер (для захвата изображения), Экспорт и Загрузить на VRoid Hub.

Я не буду останавливаться на большинстве этих категорий: поизучайте их сами. Мне же эта программа интересна только если экспортировать из неё модель.

Здесь у нас указана информация о модели и несколько параметров.
Мы можем просто экспортировать модель (Export), а можем экспортировать только волосы в формат OBJ, при этом получим сетку, состоящую не из треугольников, а из четырёхугольников. Но к волосам мы ещё вернёмся.

При нажатии на «Экспорт» откроется такое окно:

Всё равно нас попросят ввести имя для файла в формате .vrm.

Но вернёмся во Vroid, на вкладку VRoid Hub’а. Не зря я упомянула этот хаб в начале. Если вы зарегистрировались там, то можете подключиться к хабу, нажав на соответствующую кнопку.

Как создать 2д модель vtube studio

About This Software

VTube Studio is finally coming to Steam!

VTube Studio is the tool of choice for any Live2D VTuber! With a wide variety of features, it has never been easier to connect with your viewers!! VTube Studio can be used directly with your webcam on any Windows PC or Mac.

VTube Studio also supports other advanced tracking inputs to control your Live2D model, including audio-based lipsync (requires microphone). Details can be found in the documentation.

VTube Studio on Steam is free to use with all its features!! An optional «Remove Watermark» DLC exists that will remove the (very cute) watermark that would otherwise be shown when the webcam tracking is active.

Using VTube Studio is really easy!! Load your own Live2D Cubism model, run the auto-setup (or do the setup manually), start the tracker and you’re good to go. VTube Studio works well with OBS, Streamlabs or any other streaming software.

VTube Studio comes with a few simple example models, but you obviously want to import your own models!! VTube Studio ONLY supports Live2D Cubism models, other formats like VRoid are not supported. No support for other formats is planned.

If you ever get stuck, there’s a complete documentation available as well as an active Discord community that’s happy to help out new users!

What can VTube Studio do?

VTube Studio comes with tons of fun features you can try out and use to have fun with your viewers. Future development of VTube Studio will focus on community/viewer interaction, so please look forward to that!!

Some of the current features of VTube Studio:

How does the webcam-based face tracking work?

Thanks to Emiliana from VSeeFace, VTube Studio now directly supports webcam-based face tracking powered by OpenSeeFace!! It comes with various quality levels so it will even run on low-spec PCs or Macs. It’s free to use but will show a watermark if you don’t buy the «Remove Watermark» DLC, available now.

Where to get help?

The documentation, support email and active Discord community can be found on the website linked on this page. Please join, we’re waiting for you!!

SEE YOU THERE, FREN!!

This app is an indie production and is not developed by Live2D Inc., but is officially licensed to use the Live2D Cubism SDK.

VTubing for Beginners

If you’re interested in VTubing, the difference between 2D and 3D avatars, and want to know how to make your own avatar, check out our Beginner’s Guide to VTubing!

If you’ve noticed cute avatars taking over Twitch, you’re not alone. These days, VTubers and PNGTubers of all shapes and sizes can be found streaming in virtually every category. If this trend continues, streamers using avatars may come to outnumber streamers with webcams. If you’ve never heard of VTubing before, keep reading and also check out our other articles on the subject, including, “How to Become a VTuber.”

Another reason people enjoy using avatars to stream is because of the creative expression it allows. VTubers often create lore (a backstory) and a persona for their character. Some streamers infuse their avatars with elements of their own personalities, while others adopt completely different characteristics. From fantastical figures such as faeries, demons, and angels to anthropomorphic cats and foxes, anything goes in the VTuber realm.

How to Start VTubing

The VTuber rabbit hole is deep and vast. The VTuber community has its own lingo, support system, and culture. There are VTubers specifically designed for 18+ viewers and those that are more “seiso” (Japanese for “wholesome”). The community is incredibly welcoming to new users, particularly over on Twitter. Most VTubers have a “debut,” aka a date in the future where they will display their model on stream for the first time. Presumably, this is done to generate anticipation and create a community of followers before the VTuber goes live.

We’ve created a short list of things to do if you want to start down the path of VTubing. This list is by no means exhaustive.

Style Guide and Backstory

Before you jump into the creation of your character, it’s best to create a style guide and a backstory in order to have a consistent design. A backstory can aid the creation of your guide, so we recommend doing that first. Did something happen in your avatar’s past that influences the way they look now? Is your character human, mixed with an animal, or something else entirely? What is their hair, eye, and skin color? What clothes would you like them to be wearing (remember, multiple outfits means more work and/or money)? Most importantly, do you want a bust up, waist up (½ model), knee up (¾ model) or full body model?

2D vs 3D vs PNG

There are three different types of VTuber avatars to choose from. The simplest and the least expensive is a PNGTuber avatar. Many VTubers start out with a PNG avatar and slowly build up followers and income until they can afford a 2D or 3D model. We’ll explain more about PNGTuber avatars in another article and show you how to add one to Streamlabs Desktop.

You’re more than welcome to stick with a PNGTuber avatar throughout your VTubing career, but many streamers see them as stepping stones to the ultimate goal: a 2D or 3D avatar. Whichever you choose will be a matter of personal preference and budget, but just know that the better the skills of the artist and rigger (2D models) or animator (3D models), the better your avatar will look.

A 2D Avatar is pictured on the left, with a 3D version on the right.

2D VTuber Avatars

A 2D VTuber avatar is made up of flat, 2D art that has been “rigged” to move. Various elements of the avatar, including eyes, mouth, eyebrows, and even certain pieces of hair, accessories, and body parts are drawn using software like Procreate or Photoshop and saved onto different layers. The drawing is then exported as a PSD file to a program such as Live 2D Cubism and rigged from there.

Live 2D Cubism offers a free trial but it is a notoriously tricky software to learn. It’s recommended that you study rigging as much as you can before activating the free trial.

The most popular of the three, a 2D avatar is also the most expensive. Prices vary wildly, with 250 USD being on the low end and 5000 USD on the high. 2D avatars are considered by many to be the most visually appealing, as they closely resemble the 2D anime characters we’ve come to love onscreen.

Searching the tag #Live2DShowcase on Twitter will yield some incredible results. If you’re looking to purchase or make your own 2D VTuber avatar, this is a great place to start looking.

This post from KH_626 on Twitter is an example of a 2D VTuber showcase. This model has been rigged so well that, to the untrained eye, it appears to be 3D. The model is also particularly stunning as it has a variety of poses, outfits, and detailed animations. In the post, you’ll notice that KH says, “Thank you for becoming our daughter.” This is because in the VTuber community, the avatar’s artist is called the “Mama” or ママ in Japanese and the person who did the rigging is referred to as the “Papa” or パパ in Japanese. However, it is possible for the artist to do both the design and the rigging.

If you decide to purchase a 2D model, we strongly recommend that you proceed with the utmost caution when choosing an artist and rigger. Make sure the artist has plenty of samples of their work before commissioning them. With VTubing on the rise, many scammers are trying to take advantage of new users, sometimes even using stolen artwork to entice buyers. If you want Streamlabs to give a more in-depth tutorial on how to create a 2D avatar on your own, let us know!

3D VTuber Avatars

3D VTuber avatars are also very popular. Some streamers even have both 2D and 3D avatars and switch back and forth to shake things up once in a while. Like 2D rigging, 3D avatars can take an incredible amount of time to construct. Again, the better the 3D modeler, the better your avatar will look. 3D “idols” from companies like Hololive Productions have entire teams devoted to animating their VTubers. So while it’s unrealistic to expect this kind of quality for your own model, there are many skilled artists out there who can create great-looking 3D avatars. Expect to spend as little as 50 USD and as much as 1000 USD.

If you want to try your hand at making your own, there are several programs available. VRoid Studio is one of the most popular, and it’s free!

With VRoid Studio, you get out what you put into it. You can create a basic avatar in a few minutes but a detailed, personalized avatar will take hours, days, or even months as reported by some users.

VRoid Studio is quite user friendly for basic avatars. The process of creating an avatar is more like creating a Sim and doesn’t require any formal training in 3D modeling. That being said, if you are experienced in working with 3D, you’ll be able to build a more visually dynamic avatar. There are plenty of YouTube tutorials available that will show you how to create the 3D avatar of your dreams.

Similar to “Create a Sim” in the Sims 4, there are a lot of options to customize a 3D avatar in VRoid studio.

Sketchfab is a great place to look at 3D VTuber avatars to get some inspiration. There are even models available for purchase, should you so desire. Twitter, Reddit, YouTube and the VTuber community on Twitch are all great places to research 3D VTubers, find animators to commission, and access helpful tutorials.

PNGTuber Avatars

Once you have your avatar ready, Discord Reactive Images is the easiest platform for PNGTubers to use their avatars, though there are others. With Discord Reactive Images, all you need is two PNGs: one of your character talking and one of them not talking. While this method is not as fun or interactive as a full 2D or 3D avatar, the avatar changes with your voice, adding visual interest to your streams. We’ll go into detail about how to add a PNG avatar wtih Reactive Images in another article.

DenchiSoft/VTubeStudio

Latest commit

Git stats

Files

Failed to load latest commit information.

README.md

Are you a developer who wants to learn about creating VTube Studio Plugins?

Everything you’re looking for is on this page. If you have any questions, please ask in the Discord.

VTube Studio will get a public API. This means you will be able to write plugins/scripts that can trigger hotkeys, feed in face tracking data or receive face tracking data from VTube Studio.

As a first step, a proposal for the API setup and payloads will be published on this page. Once that’s available, please review the proposal and leave feedback. After this process, the API will be implemented as documented in this repository.

Afterwards, if you develop a plugin or any app that can be used with VTube Studio, please open a PR and I will add it to the list that will be created on this page.

You are free to write, publish and sell any plugin you want for VTube Studio. No permission is required and there are no licensing fees or royalties.

If you’re a user of VTube Studio looking for plugins you can use, check out the plugin list wiki page.

If you’re a developer looking for examples/libraries for you to look at that make it easier to integrate the VTube Studio API into your app, please take a look at the following table.

⚠️ If you made something you want to have included here, please open a pull request with the modified table!! ⚠️

If your plugin cannot connect to the websocket server, tell the users to check if the port is correct or if there are any firewall/antivirus settings that may prevent the connection. Most importantly, you should ask the users to «Allow Plugin API access» in VTube Studio. It’s an option on the main config page in VTS. You should also make sure your plugin supports configuring the port used for the connection.

If you can connect, the first thing you can try is check the status of your session.

REQUEST

RESPONSE

Every request has to contain «apiName» : «VTubeStudioPublicAPI» and the used API version, which will be «1.0» at the time of the first release. This API version will stay the same until incompatible changes are made to the behavior/payloads. This means that new functionality may be added to the API (including new fields in existing payloads) without increasing the version. Make sure your app can handle this and doesn’t break if it encounters unknown fields during deserialization.

An example for an incompatible change would be renaming an existing field or removing it from the payload altogether. If there are any incompatible changes, the API version will be increased for them so the old APIs can still be used as they are.

You can add the «requestID» field to every request. This is optional but recommended, because it allows you to identify responses to your requests. This ID will also be used to log the request in the VTube Studio logs along with any errors. If anything goes wrong, you can use this as reference to check for any errors related to this request in the logs.

You can use the same ID or different IDs for each request. If provided, IDs should only contain ASCII characters and be at least 1 and at most 64 characters in length. If you don’t add the «requestID» field, VTube Studio will add a randomly generated UUID for the request and return it with the response.

The «currentSessionAuthenticated» will tell you if the current session has already been authenticated.

All possible error IDs are listed on the page ErrorsID.cs.

Once connected, the client can poll information about the current app state at any time.

API Server Discovery (UDP)

VTube Studio also broadcasts the API state on the local network via UDP on port 47779. This is done once every two seconds even if the user has turned off the API. The instanceID is a random ID that gets generated for a VTube Studio instance when it is started. It doesn’t change while this instance is running so two VTube Studio instances would have different IDs.

Before using the API, you have to authenticate once. For this, you’ll have to provide your plugin name and the name of the developer. They should both be between 3 and 32 characters.

This is done by requesting a token for your plugin. Send the following request:

REQUEST

If the user has activated API access, this will trigger a popup inside of VTS asking the user if they want to allow the plugin «My Cool Plugin» by «My Name» to control VTube Studio. «pluginIcon» can be added optionally. This has to be a base64 encoded PNG or JPG image with the exact dimensions 128×128 pixels. If you add this, the icon will be used in the plugin access request popup shown to the user. If they click «Allow», you will get the following response:

RESPONSE

The field «authenticationToken» contains an ASCII string which will serve as the token for authenticating with the API. It is at most 64 characters in length. If they deny access, you will get the following error:

RESPONSE

Users can revoke API access from your plugin at any point from within VTube Studio. If they do, you will also get this error when trying to send any requests. You may try to re-authenticate in this case.

You only need to obtain the token once. With this token, you can now authenticate for this session. In the next session (for example when VTS is restarted or your plugin has to re-connect to VTS for some reason), you can use the same token to authenticate again so you don’t have to send the requests to get a token again so the user will only be asked about allowing your plugin once.

To authenticate for one session, send the following request with your token:

REQUEST

«pluginName» and «pluginDeveloper» have to match the values you used when requesting the token, otherwise the authentication request will fail.

If the token is valid and API access has not been revoked by the user, you will get the following response:

RESPONSE

Congratulations, you are authenticated and can use the VTube Studio API.

Note about timestamp field: All responses also have a «timestamp» field that contains the UNIX millisecond timestamp at which your request was processed. You may include a «timestamp» field in your requests, but it will be ignored.

Getting current VTS statistics

REQUEST

RESPONSE

Window width and height is in pixels.

Getting list of VTS folders

Returns the name of various VTube Studio folders. They are in the StreamingAssets folder in the game files.

REQUEST

RESPONSE

Getting the currently loaded model

REQUEST

RESPONSE

«modelLoaded» will be true if a model is currently loaded. If no model is loaded or a model is currently in the process of being loaded, this will be false. In this case, all other values will be empty (or zero in case of integers).

«modelLoadTime» is the time in milliseconds it took to load the current model. «timeSinceModelLoaded» contains the time in milliseconds since the model has been loaded.

«vtsModelIconName» contains the name of the icon used for this model in the model selection bar in VTube Studio. If the model has no icon set, this will be an empty string. All file names returned in this request are relative to the respective model folder.

Getting a list of available VTS models

REQUEST

RESPONSE

«modelLoaded» is true if the respective model is currently loaded in VTube Studio, false otherwise.

Loading a VTS model by its ID

REQUEST

RESPONSE

This may fail and return an error if the app is currently in a state where no model can be loaded. This includes having config windows open or a model load operation currently already being in progress. There is also a global 2 second cooldown for this requests.

Moving the currently loaded VTS model

If a model is loaded, this allows you to change its position, rotation and size. If no model is loaded, this will return an error, see ErrorsID.cs

The VTS Coordinate System

You don’t have to provide all values in the request. For example, you could just provide positions or just a rotation or any other combination. All values that are not included in the request will be ignored when setting the position/rotation/size. Like this, you could for example only change the X-coordinate of the model while leaving everything else as it is.

REQUEST

RESPONSE

Requesting list of hotkeys available in current or other VTS model

REQUEST

The «modelID» (and «data» object in general here) is optional. If it’s not provided, the hotkeys for the current model are returned. If the model ID is provided, the hotkeys of the model with the give model ID are returned. If no model with that ID is found, an error is returned (see ErrorID.cs, ModelIDNotFound ).

If both «modelID» and «live2DItemFileName» are provided, only «modelID» is used and the other field will be ignored.

RESPONSE

If no model ID was specified in the request and no model is loaded, «modelLoaded» will be false and the «availableHotkeys» array will be empty. If an ID was specified, the «modelLoaded» field will be true or false depending on whether or not the model with the given ID is currently loaded.

The «description» field contains a description of what the hotkey does. You can show this string on your plugin UI when you encounter a hotkey type that your plugin doesn’t know, for example because the hotkey type was newly added to VTube Studio.

The «keyCombination» array contains the keyboard (or mouse key) combination that will trigger they hotkey. See RestrictedRawKey.cs for all possible values. If the array is empty, no key combination has been set. IMPORTANT: For security reasons, the «keyCombination» array will currently always be empty, so this data won’t be available to plugins for now. May be re-added in a future update.

All hotkey type strings can be found on the page HotkeyActions.cs.

Requesting execution of hotkeys

REQUEST

RESPONSE

This triggers a hotkey for the currently loaded VTube Studio model, if you leave «itemInstanceID» empty or don’t provide it at all. If you do provide an ID in that field, it will trigger the hotkey in the given Live2D Item model instead (see below for more info).

You can trigger hotkeys either by their unique ID or the hotkey name (case-insensitive). If multiple hotkeys have the same name, only the first one will be executed (order is the order they show up in the UI). Hotkeys with empty name can only be triggered by ID.

This may return an error if the hotkey ID or name wasn’t found or the hotkey couldn’t be executed for some reason. Reasons include no model being currently loaded or the hotkey cooldown not being over (one specific hotkey can only be triggered once every 5 frames). You may send different hotkeys in quick succession, which will result in them getting queued. Once every 5 frames, one hotkey is take from the queue and executed. The queue holds 32 hotkeys. When the queue is full but you try to send in more hotkeys, an error will be returned.

Triggering hotkeys in Live2D Items

You can also use this request to trigger hotkeys in Live2D items. See this page for more info on Live2D items in general.

Requesting current expression state list

Setting «details» to true will return a few more details in the response (specifically, the «usedInHotkeys» and «parameters» arrays will be empty if «details» is set to false).

REQUEST

The expressions array will be empty if no model is loaded. Otherwise, this will contain information about the available expressions for the currently loaded model.

If «details» was set to true in the request the «usedInHotkeys» array will contain a list of all hotkeys that this expression is used in. Also, the «parameters» array will contain the contents of the expression, meaning the Live2D parameter IDs and target values of all parameters used in the expression.

RESPONSE

Requesting activation or deactivation of expressions

It’s recommended to activate expressions via hotkeys since otherwise users could end up with activated expressions they can’t deactivate because they don’t have hotkeys set up for them. However, you can also activate and deactivate hotkeys directly if that’s required for your plugin. You do this by passing in an expression file name and whether the expression should be activated or deactivated.

REQUEST

RESPONSE

Requesting list of ArtMeshes in current model

ArtMesh tags returned in the «artMeshTags» array will not contain duplicate tags.

If no model is loaded, «modelLoaded» will be false and the arrays will be empty.

Note about «tags»: Tags can be added to ArtMeshes in the «UserData» field in the Live2D Cubism Editor. You can add any text into that field in the editor. VTube Studio will split that text at spaces and newline characters. This means if your tag text is «my tag», it will become two tags in VTS: «my» and «tag». You can add as many tags to each ArtMesh as you want.

REQUEST

RESPONSE

Tint ArtMeshes with color

You can tint ArtMeshes by providing a color and matching criteria. Any ArtMesh matching any of the given criteria will be tinted with the given color. To reset the ArtMesh color, tint it white (R=G=B=A=255). You cannot turn an ArtMesh white with this request, only darker.

Not providing one of the color values or any being outside the 0-255 range will return an error. Trying to send this request when no model is loaded will also return an error.

All arrays included in the «artMeshMatcher» object are optional. If you include them, it will select ArtMeshes based on whether or not the ArtMesh names or tags match any of the given strings exactly or contain them (when using the «nameContains» / «tagContains» arrays). The «artMeshNumber» array lets you select ArtMeshes based on their order within the model. If you just want to tint the whole model, don’t include any of the matcher arrays and instead set «tintAll» to true.

When the session is disconnected, all ArtMeshes that have been tinted in this session will be reset to their default (fully opaque white). When multiple plugins/sessions overwrite the color of an ArtMesh, it will have the color set by the most recent request.

Matching is always executed case-insensitive.

REQUEST

Super secret note: If you add «jeb_»: true to the «colorTint» object, it’ll activate the rainbow animation mode for the matched ArtMeshes.

RESPONSE

Getting scene lighting overlay color

VTube Studio has functionality to overlay the model with the average color captured from a screen (macOS/Windows) or specific window (Windows only). For more info, see this page in the documentation.

You can get the current user configuration and color for the scene lighting overlay system via the API.

baseBrightness (between 0 and 100), colorBoost (between 0 and 100) and smoothing (between 0 and 60) are the three values users can select using sliders on the UI. For an explanation, please check documentation page about this feature.

The average color calculated from all activated screen parts can be found in the colorAvg fields (R, G and B between 0 and 255).

The final color that will be used to overlay the ArtMeshes is in the colorOverlay fields (R, G and B between 0 and 459). Note that this allows values higher than 255. The final color is calculated as follows:

colorAvg * ( colorBoost / 50) + WHITE_COLOR * ( baseBrightness / 100)

This may produce values as high as 2 * 255 for R, G and B. The values are capped at 1.8 * 255 = 459.

When the lighting overlay system is turned off, active on the top payload level will be false and all colors will be returned as white.

REQUEST

RESPONSE

Checking if face is currently found by tracker

Returns whether or not the face is currently found by the active tracker (smartphone via network/USB or webcam tracker).

REQUEST

RESPONSE

Requesting list of available tracking parameters

You can request a list of parameters currently available in VTube Studio. This includes all regular parameters and all custom parameters created by plugins. Parameters created by plugins will be marked as such when you select them from the parameter list in VTube Studio. It will also show the name of the plugin that created them.

Important: This may return a lot of data. It is not recommended to send this request at high frequencies (60+ FPS), as it may cause performance issues on slower PCs.

REQUEST

RESPONSE

Note: The «defaultParameters» array is incomplete in this example payload. This will contain all default face/mouse/etc. tracking parameters offered by VTube Studio

Get the value for one specific parameter, default or custom

If the requested input parameter does not exist, an error will be returned.

REQUEST

RESPONSE

Get the value for all Live2D parameters in the current model

This will return an error if no model is loaded.

REQUEST

RESPONSE

If no model is loaded, «modelLoaded» will be false and the parameter array will be empty. All other fields will be empty strings.

Adding new tracking parameters («custom parameters»)

You can also add your own new tracking parameters and use them in your VTube Studio models. They are called «custom» parameters. After being added by your plugin, the user can select your parameters as inputs for Live2D parameter mappings.

Parameter names have to be unique, alphanumeric (no spaces allowed) and have to be between 4 and 32 characters in length. New tracking parameters are created like this:

REQUEST

RESPONSE

The request may fail and return an error if the parameter name is invalid.

The explanation is an optional, short (less than 256 characters) explanation stating what the parameter does and how users should use it in their models. If you provide this in the request, it will be shown when the user views the details of this custom parameter.

There is a global limit in VTS of 300 custom parameters and a limit of 100 custom parameters per plugin. If you try to create more, an error will be returned.

These custom parameters you create are stored as part of the VTube Studio configuration in a file called custom_parameters.json in the Config folder, which is located in the VTube Studio StreamingAssets folder. If you revoke the authentication token from a plugin, all custom parameters that this plugin create will also be deleted. They will still be set in the VTube Studio models that have used them, but will be shown in red text to indicate that the input parameter no longer exists. Plugins can get another token and recreate these parameters at any time and they will continue to work.

Delete custom parameters

You can delete custom parameters. Default parameters cannot be deleted. You also cannot delete parameters created by plugins other than the one you have used to authenticate this session.

REQUEST

RESPONSE

Feeding in data for default or custom parameters

You can feed in data for any default or custom parameter. These tracking parameters will then be used as inputs for the loaded VTube Studio model and any loaded Live2D Items.

The payload looks like this:

REQUEST

RESPONSE

If one or more of the parameters don’t exist, an error payload will be returned.

If values exist for those parameters from webcam/iOS/Android tracking, the values from the API will overwrite those for as long as you keep sending data over the API. You have to re-send data for a parameter you want to control with your plugin at least once every second. Failure to do so will result in the parameter being considered «lost» and it will go back to the value of whatever was controlling it before. If nothing else is controlling it, it will return to its default value.

You can also add an optional «weight» parameter between 0 and 1. This can be used used to mix the «value» you send in for the parameter with the value that has been set for the parameter from face tracking. You could for example control a parameter 50% with face tracking and 50% using the API. Only one API plugin can write to one parameter at a time though. One use-case for this would be to fade in/out control of a face tracking parameter so it doesn’t «jump» the moment you take control of it via the API. If you don’t include the «weight» parameter in your request for a parameter, it will be considered to have the value 1, meaning the target parameter will instantly be set to the value provided by your plugin.

It should also be noted that these parameters are treated similar to normal tracking parameters. As such, you can select them as normal inputs for VTube Studio parameter mappings and apply smoothing via the sliders on the UI. Deleting custom parameters while they are being used by a model also does not cause any issues and they can be recreated at any time.

Controlling one parameter with multiple plugins

Getting physics settings of currently loaded VTS model

Users can customize physics settings in VTube Studio. They can change the following settings:

These values set by the user can be read via the API and also overridden temporarily (see SetCurrentModelPhysicsRequest ).

To read the values of the currently loaded model, use this request:

REQUEST

RESPONSE

If a model is loaded, the modelHasPhysics field will tell you whether or not the model has a valid physics setup. Some models don’t have physics set up or have a broken physics file which will cause the physics system to not start correctly. physicsSwitchedOn will be true if the Use Physics toggle has been activated for this model by the user in VTube Studio. usingLegacyPhysics is the state of the Legacy Physics toggle.

The apiPhysicsOverrideActive and apiPhysicsOverridePluginName fields indicate whether or not a plugin is currently overriding some of the physics settings. If it’s active field is true, the name field will contain the name of the plugin. Only one plugin can take control of the physics system at a time. This will also be explained as part of the SetCurrentModelPhysicsRequest request.

If you use the SetCurrentModelPhysicsRequest to override physics or wind base values or multipliers, these changes will NOT be reflected in this Get-Request. You have to remember your own physics overrides.

Note for the physicsGroup array: Every group has an ID but not every group has to have a name. In that case, the respective groupName field will be an empty string.

Overriding physics settings of currently loaded VTS model

You can override the physics settings of the currently loaded model using this request. Once one plugin has taken control of the physics system via this API, no other plugin can use this API until the first plugin has given up control. Trying to do so will return the respective error, see «ErrorID.cs» ( SetCurrentModelPhysicsRequestPhysicsControlledByOtherPlugin ). This will also return an error if no model is loaded, if any of your provided physics group IDs don’t exist in the current model or if you forgot to add a value to your overrides.

If the user has turned off physics for the currently loaded model, you cannot turn physics on using this API. You can only use this API to override physics/wind base values and multipliers.

As explained in the GetCurrentModelPhysicsRequest section above, values for physics/wind multipliers should be between 0 and 2 while values for physics/wind base values should be integers between 0 and 100 (because that’s also how they’re shown to the user in the app). Values outside that range will automatically be clamped.

If you want to set multipliers for strength or wind for a specific physics group, use the strengthOverrides and windOverrides arrays with the respective group ID and setBaseValue set to false. If you set setBaseValue to true, the provided value will be set as base value for physics strength or wind instead of a specific group. You can leave the group ID ( id ) empty in that case.

Generally, the values set using this API are used to override the values set by the user in the app. They’re not actually shown to the user on the UI and are not saved. Override values set using this API are automatically unset when their timer runs out (the value you set using overrideSeconds ). If you want to keep overriding values, you have to repeatedly send this request.

When all timers run out, the API will no longer consider your plugin as controlling the physics system so another plugin could start controlling the physics system.

Override timer values have to be between 0.5 and 5 seconds. Values outside that range will automatically be clamped.

REQUEST

RESPONSE

Get and set NDI settings

You can request the current NDI settings and change them via the API. This allows you to turn NDI on/off, set a custom fixed resolution and more.

Information about NDI and how to use it in VTube Studio can be found on this page: https://github.com/DenchiSoft/VTubeStudio/wiki/Streaming-to-Mac-PC

«ndiActive» turns NDI on/off. If NDI is on, «useNDI5» uses NDI 5 instead of NDI 4 (I recommend using NDI 5).

If the NDI resolution does not match the window resolution, VTube Studio will automatically cut and scale the video stream. VTube Studio will always make sure the aspect ratio is correct, even if that means cutting off parts at the top/bottom or left/right.

Important: This request has a cooldown period of 3 seconds. Triggering it too fast will return an error of type NDIConfigCooldownNotOver (see «ErrorID.cs»).

REQUEST

The response will just contain the current settings (the new ones if you requested a new config to be set). The «setNewConfig» field does not have any significance in the response.

RESPONSE

Requesting list of available items or items in scene

Filtering for specific items

If you only want the item lists to contain items with a certain item instance ID or a certain filename, you can provide them in the «onlyItemsWithInstanceID» and «onlyItemsWithFileName» fields respectively.

There will only ever be at most one item with a certain instance ID in the scene, but there could be many items with the same filename because you can load many item instances based on the same item file.

Please also note that item filenames are unique, meaning there cannot be two item files with the same filename. They are also case-sensitive, so if you want to refer to one specific file, make sure to not change the capitalization.

REQUEST

The fields in the response should me mostly self-explanatory.

The filename is the name of the item file. This is the name you can use to load an instance of the item into the scene. For JPG/PNG/GIF items, this is the full filename (without path) including the file extension (for example «my_item.jpg»). For animation folders, it’s the folder name. For Live2D items, it is also the folder name.

«canLoadItemsRightNow» may be false if the user has certain menus or dialogs open in VTube Studio. This generally prevents actions such as loading items, using hotkeys and more.

«framerate» and «frameCount» are only available for animated items (GIFs and animation frame folders).

If «pinnedToModel» is true, «pinnedModelID» will contain the model ID of the model the item is pinned to (which will be the currently loaded model) and «pinnedArtMeshID» will contain the ID of the ArtMesh the item is pinned to.

RESPONSE

Loading item into the scene

With this request, you can load items into the scene. Items are loaded from the «Items» folder on the user’s PC.

You should make sure that your plugin cleans up its items. You should absolutely never leave any items outside of the visible scene where the user can’t access them anymore without using the «Delete all items in the scene» button. To make this easier for you, you can set «unloadWhenPluginDisconnects» to true.

You can use the «fadeTime» field to specify a fade in/out time between 0 and 2 seconds for the item. If you set it to 0, the item will just appear instantly.

REQUEST

The response contains the instance ID of the newly loaded item in the instanceID field.

RESPONSE

Removing item from the scene

You can use this request to unload any item that is currently loaded in the scene.

Setting «unloadAllInScene» to true unloads all items. All other fields are ignored in that case.

Setting «unloadAllLoadedByThisPlugin» to true unloads all items that have been loaded by this plugin.

You can also request specific item instances or item instances that have been loaded from certain filenames by using the optional «instanceIDs» and «fileNames» arrays. Even if those items aren’t found in the scene, the request will not return an error. It will just return a response with an empty array.

This may return an error of type CannotCurrentlyUnloadItem if the user currently has menus open that prevent VTS from loading/unloading items.

REQUEST

The response contains the instance IDs and filenames of the unloaded items.

RESPONSE

Controling items and item animations

You can control certain aspects of items in the scene. This request allows you to make items darker (black overlay), change the opacity, and control the animation of animated items. This request does not work with Live2D items and will return an error of type ItemAnimationControlUnsupportedItemType if you try (see ErrorsID.cs). This can be useful for «reactive PNG»-type plugins and more.

Using auto-stop frames

Once the animation reaches one of those frames, it will stop playing and can only be started again via the API using this request to set the animation play state to true (see above).

REQUEST

The response contains the current frame index and whether or not the animation is currently playing (only for animated items, for other item types these fields should be ignored).

RESPONSE

Moving items in the scene

The «itemsToMove» array can have up to 64 entries. All entries beyond that will be ignored. If the array has entries with duplicate item instance IDs, the last entry in the array for that ID will be used.

If you want to set the flip state of the item, set «setFlip» to true. The flip state can then be set using the «flip» field.

Item movement transition fade types

Here’s a visual representation of the movement modes:

REQUEST

If the request was successful, you will receive a response containing the status of all requested items.

Как статья?

Спонсоров

VTube Studio позволяет виртуальным YouTubers использовать аватары Live2D

В работе появился новый набор для создания Unity 3D, использующий захват производительности Live2D с помощью набора инструментов дополненной реальности ARCore от Google. Программное обеспечение позволяет в режиме реального времени отслеживать лица с помощью веб-камеры или другого устройства захвата, при этом визуализированный вывод выполняется по мере визуализации исполнения или движений.

Denchi Soft выпустил почти десятиминутное видео, чтобы продемонстрировать, как работает программное обеспечение, и продемонстрировать, что вы можете ожидать от комплекта, когда он в конечном итоге будет выпущен для публики в какой-то момент в первом квартале 2020 года.

Вы можете проверить демонстрацию видео ниже.

Итак, как показано на видео, данные о лицах считываются и сохраняются ARCore, а затем поступают в нейронный обучающий конвейер Tensor Flow, который подключается к Barracuda в Unity 3D. Оттуда данные передаются по протоколу UDP на основной Студия VTube интерфейс с использованием анимаций Live2D и элементов управления пользовательского интерфейса.

Изучив основы работы программного обеспечения, мы продемонстрировали, как тонирование цвета и физическое рендеринг освещения могут также применяться к моделям Live2D, создавая восприятие динамического освещения в реальном времени.

Вы также можете настроить фон, импортировать различные сцены и даже настроить горячие клавиши, чтобы вы могли изменять выражения лица, загружать пользовательские макросы и создавать конкретные реакции для оживления прямой трансляции.

Уже есть некоторые 3D-решения, которые ведут себя подобно тому, что Студия VTube можно, но если вы более заинтересованы в использовании нарисованных от руки персонажей, как показано на видео выше, то Студия VTube это определенно путь.

Если бы YouTube не взрывался, то я бы, наверное, сказал, что у виртуальных клубней впереди были захватывающие времена, но в настоящий момент энтузиастам не очень-то интересно смотреть на создание контента, если, конечно, вы просто делали это ради черта. из этого и не на самом деле генерировать какой-либо значительный доход от усилий.

Вы можете узнать больше о Студия VTube от Denchi Soft, проверив Страница GitHub.

(Спасибо за новостной совет Wondy Bergers)

VTube Studio Apk Скачать v1.14.7 бесплатно для Android [последняя версия]

Создайте себе виртуальную 2D-модель и используйте ее в своих прямых трансляциях с помощью VTube Studio Apk. Вы можете бесплатно скачать приложение по указанной ссылке.

Вот так много интересных функций, которые вы собираетесь иметь в приложении. Итак, я собираюсь обсудить все эти функции и другие важные детали в этой статье. Так что оставайтесь с нами и читайте обзор.

Что такое VTube Studio Apk?

Если вы ищете уникальную идею и хотите представить аватар своим поклонникам или подписчикам в социальных сетях, то это приложение лучше всего для вас. Потому что это целая студия, которая позволяет создавать потрясающие аватары, пряча собственное лицо.

Кроме того, это позволяет загружать живые 2D-модели на мобильные телефоны Android. Кроме того, он поддерживает macOS и Windows. Итак, создайте файл журнала и загрузите его на нужные устройства. Однако дальнейшие инструкции вы получите прямо в приложении.

Однако есть так много интересных функций, о которых я расскажу прямо в этой статье. Но перед этим я также предлагаю вам попробовать другие приложения, очень похожие на это. Итак, к ним относятся Wombo AI Apk и Реплика Романтический Партнер.

App Подробнее

Особенности

Это один из таких AI-приложения что позволяет вам изменить ваш опыт потоковой передачи в прямом эфире. Итак, есть так много интересных функций, которые вы собираетесь прямо в VTube Studio Apk. Здесь я собираюсь объяснить вам основные черты в баллах.

Скриншоты приложения

Как скачать и установить VTube Studio Apk?

Это действительно интересное приложение, дающее вам опыт метавселенной. Итак, если вы ищете какое-либо такое приложение, то вы попали на нужную страницу.

Потому что вам не нужно никуда идти, чтобы скачать Apk. Я предоставил последнее обновление приложения, и вы можете скачать его с этой страницы. Я также буду предоставлять обновления для приложения в будущем, так что продолжайте посещать эту страницу для получения дальнейших обновлений.

Но пока вы можете скачать текущую редакцию, используя ссылку в конце этой страницы. Просто нажмите на ссылку и немного подождите. После завершения процесса загрузки вам нужно нажать на файл и установить его на свой телефон.

Как только вы закончите установку, не забудьте разрешить или разрешить запрашиваемые разрешения. Если вы это сделаете, то приложение отлично подойдет вам.

Выводы

Я уверен, что вы найдете это приложение интересным, когда попробуете его на своем телефоне. Итак, загрузите последнюю версию VTube Studio Apk по указанной ниже ссылке.

Скачать VTube Studio Apk для Android [Живые 2D-модели]

Ютуберы и стримеры любят делать новые вещи с помощью стримов. Итак, сегодня мы здесь с одним из лучших доступных приложений для всех вас, с помощью которого вы можете легко привлечь больше зрителей. VTube Studio Apk, чтобы получить виртуальные 2D-эффекты и наслаждаться.

Как вы знаете, существует несколько методов, которыми люди пользуются, чтобы привлечь больше зрителей и подписчиков. Но любому новичку будет довольно сложно, пока вы не предоставите что-то новое и уникальное. Таким образом, мы предлагаем вам один из лучших вариантов.

Что такое VTube Studio Apk?

Пользователям доступны несколько функций, которыми мы собираемся поделиться здесь со всеми вами. Платформа обеспечивает легкий доступ к сервисам, с помощью которых пользователи могут легко повысить свою популярность на любой потоковой платформе.

Миллиарды людей любят анимацию, поэтому приложение VTube Studio предоставляет пользователям легкий доступ к услугам. Платформа предоставляет пользователям одни из лучших услуг продвинутого уровня, с помощью которых вы можете легко изменить свой дисплей.

Есть несколько персонажей и разные среды, с помощью которых вы можете легко произвести впечатление на своих зрителей. Платформа предоставляет одни из лучших наборов услуг для пользователей, которыми вы можете легко пользоваться и приятно проводить время на платформе.

Приложение не предоставляет никаких ограничений для пользователей, что означает, что вы можете использовать приложение для потоковой передачи на любой платформе. Он предоставляет пользователям удивительные и уникальные услуги, к которым вы можете легко получить доступ и весело провести время.

Большинство функций здесь доступны бесплатно, но в нем также доступны некоторые дополнительные функции. Итак, если вас устраивают доступные услуги, вы можете вложить некоторую сумму денег, чтобы получить доступ ко всем доступным услугам.

Мы рекомендуем вам протестировать все бесплатные услуги приложения, прежде чем делать какие-либо инвестиции. VTube Studio Загрузите на свое устройство и начните изучать все доступные бесплатные функции приложения. Вы можете легко изучить услуги, прежде чем совершать какие-либо платежи.,

В настоящее время приложение не поддерживает систему отслеживания выражений лиц, которая будет добавлена ​​в ближайшее время. Так что, если вы не нашли эту функцию, не беспокойтесь об этом. Эти и многие другие функции будут добавлены в будущих обновлениях приложения.

Точно так же пользователям доступно больше функций, к которым вы можете получить доступ и пользоваться ими. Итак, если вы хотите получить доступ ко всем этим услугам, вы можете загрузить приложение на свое устройство. Найдите все удивительные функции приложения.

У нас есть для вас другие похожие приложения, которые вы также можете попробовать на своем устройстве. Итак, если вы хотите хорошо провести время, тогда получите Приложение Toonme Pro и Мультяшное приложение Pro. Оба эти замечательные приложения также предоставляют схожие услуги.

App Подробнее

Скриншоты приложения

Как скачать файл Apk?

В настоящее время приложение недоступно в Google Play Store по всему миру, но вам не о чем беспокоиться. Мы собираемся поделиться файлом Apk, которым любой сможет пользоваться откуда угодно. Итак, вам нужно только получить файл Apk и установить его на свое устройство.

Найдите кнопку загрузки, которая находится вверху и внизу этой страницы. Как только вы найдете кнопку, вам нужно сделать одно нажатие на нее и подождать несколько секунд. Процесс загрузки скоро начнется автоматически после того, как будет сделано нажатие.

Основные особенности

Выводы

как стать 3D АНИМЕ Тянкой VTUBE Studio

КАК СТАТЬ ̶А̶Н̶И̶М̶Е̶ ВИРТУАЛЬНЫМ ЮТУБЕРОМ [Vtuber]СкачатьПодробнее

Программа VTube Studio #1: Основные настройки 2D-аватара. Эмоции, выражения. Вступительный гайд.СкачатьПодробнее

КАК СДЕЛАТЬ ПЕРСОНАЖА НА СТРИМЕ? // КАК СТАТЬ АНИМЕ ПЕРСОНАЖЕМ // АВАТАРЫ ДЛЯ СТРИМОВ // FACERIGСкачатьПодробнее

ПОДРОБНЫЙ ТУТОРИАЛ ПО VRoidStudio | СПРАВОЧНИК VRoidStudioСкачатьПодробнее

[VTUBER] Как стать втубером через телефон? Custom cast обзор.СкачатьПодробнее

КАК СТАТЬ 3D VTUBER’ом | Большой гайд | Часть 1СкачатьПодробнее

Как Сделать Модель Vtuber (Бесплатно)СкачатьПодробнее

Самая популярная программа для 2д втуберства || VTube Studio обзорСкачатьПодробнее

Обзор программ и приложений для VTuber’ов #3.1. Где купить/ Заказать 2D-модельку? Live 2D Cubism.СкачатьПодробнее

Как создать 2D-модель VtuberСкачатьПодробнее

СОФТ / ПРОГРАММЫ ДЛЯ ВТУБЕРОВ / VSEEFACE,VUP,VTUBE STUDIO #vtuber #втубер #vtubers #втуберыСкачатьПодробнее

КАК СДЕЛАТЬ АНИМЕ ПЕРСОНАЖА НА СТРИМЕ БЕСПЛАТНО?СкачатьПодробнее

Создать модельку для втуберства стало ещё проще || Официальная версия Vroid studioСкачатьПодробнее

Vtuber приложения на адройд и iosСкачатьПодробнее

КАК СТАТЬ 3D VTUBER’ом | Большой гайд | Часть 2СкачатьПодробнее

Как стать втубером за 5 минут | Aturin | #КсатСкачатьПодробнее

[VTUBER] Где лучше делать модельку для втуберства? Сравнение лайв2д и вроид.СкачатьПодробнее

VTuber Maker

Just with a webcam, you can be a VTuber!

It brings VTuber avatar to life, and takes your streaming to the next level.

Make more personalized and vivid live streaming

VTuber Maker provides you with unlimited creativity and vividness through a rich public VTuber avatars library and precise face tracking technology.

Feature Function

Fast, High Quality Tracking

In addition to face tracking, hands tracking, audio based lipsync, we also provide professional body tracking to make your VTuber avatar to live

Push Stream & Virtual Camera

Through the obs virtual camera powered by VTuber Maker combined with the obs streaming tool, the content of VTuber is presented to the audience in real time
Of course, you can also use green screen capture or transparency capture

Paint & Props & Behavior & Effects

Editing Paint, props, behavior props, effects to make avatar fun, while interacting with viewers through our twitch extension to trigger these effects elements

Rich VTuber Background Rooms

Provides various VTuber background rooms to meet your every needs, and one click change to green screen or pure color screen.
You can even upload your own images

VTuber Maker is focusing on VTuber and VUP services, professional virtual presentation

White Board

Share screens by window capture
Share content by importing your files, such as PowerPoint, Keynote, video or PDF.
Put them all together on a whiteboard

Displaying multiple avatars on the same stage by adding NPC.
And control action whether to track together.

Effect

8 special effects to suit various scenarios and avatar live needs

Animations

Rich 3D animation library, allowing you to trigger avatar animation effects quickly and interestingly

Bone Dynamics

Through bone dynamics, both public
and private models can be flexible
and vivid

4 idle state, suitable for various
scenarios, so you don’t have to add
any action avatar is still not boring

Want to make a unique avatar? Click To View!

Join Us

Need help with Live3D? Want to communicate with more Virtual YouTubers?
Welcome to our vtuber creator community

You can also find us in the following ways

Email

QQ Group

Become a partner

Frequently Asked Questions

Got a question? We’ve got answers. If you have some other questions, see our support center.

What is a virtual camera?

Virtual Camera is a software driver that simulates a camera, it can replace your real camera, and you can communicate with others even if you don’t have a camera.
After it is installed and turned on on the VTuber Maker, the VTuber Maker will pass the current virtual screen, excluding the UI, to the virtual camera driver, so that the person who communicates with you can see your virtual screen and virtual avatar.

Common application scenarios:
1. Obs push the stream to display the avatar screen without UI;
2. Zoom, discord and other software that can use cameras. This software can use virtual cameras instead of cameras.

What does VTuber Maker do with face tracking？

VTuber Maker not only has fast, high quality face tracking, but also has the ability to track body tracking and hand tracking.

Through this tracking, you can make the avatar follow your body movements.
For example, regarding face tracking, you can make the VTuber avatar’s expression match yours.

How to use VTuber Maker to live streaming for free?

For users who experience our software for free, we provide some free resources including avatars and backgrounds. You can use them, and then live stream through green screen capture or transparent capture.

For subscribed users, you will have richer functions and richer resources, and just by starting a virtual camera, you can perform live streaming without UI.

We also provide free experience subscription function activities. Come and contact us.

VTube studio #5: Как демонстрировать 2D-модельку на стриме через OBS|Показать аватар в видео-звонке?

КАК СДЕЛАТЬ ПЕРСОНАЖА НА СТРИМЕ? // КАК СТАТЬ АНИМЕ ПЕРСОНАЖЕМ // АВАТАРЫ ДЛЯ СТРИМОВ // FACERIGСкачатьПодробнее

Программа VTube Studio #1: Основные настройки 2D-аватара. Эмоции, выражения. Вступительный гайд.СкачатьПодробнее

Программа VTube Studio #3: Настройка физики и новых автоматических эмоций, реакция на ваши движенияСкачатьПодробнее

Самая популярная программа для 2д втуберства || VTube Studio обзорСкачатьПодробнее

Как провести стрим/ стримить/ записать видео с помощью программ для Vtuber’ов?СкачатьПодробнее

Программа VTube Studio #3.1: Своя анимация для позы по умолчанию (✿◡‿◡) Гайд | Туториал | ОбучениеСкачатьПодробнее

Как добавить простой аватар на стрим или запись видео | Настройка в обс | Gazo TuberСкачатьПодробнее

Как оживить свой аватар на стриме/записи видео || VSeeFace || Стать BитьюберомСкачатьПодробнее

[VTUBER] Как стать втубером через телефон? Custom cast обзор.СкачатьПодробнее

Обзор программ и приложений для VTuber’ов #3.1. Где купить/ Заказать 2D-модельку? Live 2D Cubism.СкачатьПодробнее

КАК СТАТЬ ̶А̶Н̶И̶М̶Е̶ ВИРТУАЛЬНЫМ ЮТУБЕРОМ [Vtuber]СкачатьПодробнее

Сравнительный обзор программ и приложений для Vtuber’ов #1. Vroid, VMagicMirror и альтернативы.СкачатьПодробнее

Как Сделать Модель Vtuber (Бесплатно)СкачатьПодробнее

КАК СДЕЛАТЬ АНИМЕ ПЕРСОНАЖА НА СТРИМЕ БЕСПЛАТНО?СкачатьПодробнее

Гайд модель для видео vtuberСкачатьПодробнее

How to import Live2D to Vtube studio! + free models!🤗СкачатьПодробнее